صفحه 3 از 11 نخستنخست 1 2 3 4 5 6 7 ... آخرینآخرین
نمایش نتایج : از شماره 21 تا 30 , از مجموع 109
Like Tree22تشکر

موضوع: Canon EOS 300D / Digital Rebel

  1. #21
    كاربر آشنا
    تاریخ عضویت
    October 2004
    محل سکونت
    Rasht
    نوشته ها
    50
    تشکر شده
    7
    تشکر کرده
    0

    پیش فرض

    با سلام




    دوربین من نسخه اصلی اش 111هست آیا من هم میتونم استفاده کنم

  2. #22
    كاربر آشنا
    تاریخ عضویت
    October 2004
    محل سکونت
    Rasht
    نوشته ها
    50
    تشکر شده
    7
    تشکر کرده
    0

    Wink

    بچه ها سلام
    دیدم کسی آنلاین نبود تا جواب بده رفتم و دانلود کردم بعد هم طبق گفته دوستمان امین عمل کردم
    موفقیت آمیز بود دستت درد نکنه خیلی باحالی
    عشقست 300دی=10دی
    ویرایش توسط arghavan : Thursday 26 May 2005 در ساعت 21:38

  3. #23
    كاربر همراه
    تاریخ عضویت
    January 2004
    محل سکونت
    tehran
    نوشته ها
    102
    تشکر شده
    105
    تشکر کرده
    0

    پیش فرض

    من این فایل رو گرفتم اما نمی دونم چرا رو Cf کپی نمیشه!!من هنوز به شدت از این کار وحشت دارم چون شنیدم اگه موفقیت آمیز نباشه دوربین برای همیشه میره تعطیلات.میشه لطف کنین امکاناتی که میده رو کامل بنویسین ببینیم ارزش این ریسکه سنگینو داره یا نه.
    Shamim تشکر می‌کند.
    Canon EOS 20D + EF-S 18-55 f/3.5-5.6 + Canon EF 75-300 IS USM + Canon EF 28-135 f/3.5-5.6 IS USM + Sigma 70-200 F2.8 APO DG EX HSM

    http://nima.fotopages.com/

    نیما معصومی

  4. #24
    كاربر همراه
    تاریخ عضویت
    December 2004
    محل سکونت
    Tehran
    نوشته ها
    345
    تشکر شده
    68
    تشکر کرده
    0

    پیش فرض

    سلام

    یک چیزی یادم رفته بود: این Firmware کرک شده تنها مشکلی که داره اینه که منوی تغییر زبان درست کار نمیکنه. یعنی اگه شما بخواهید زبان منو رو از انگلیسی به مثلا فرانسه تبدیل کنید (فارسی نداره تو منوش!!) به اشکال برمیخورید . برای این کار باید Firmware اصلیشو نصب کنید و زبان رو تغییر بدید و دوباره Firmware کرک شده رو نصب کنید.
    در ضمن این نسخه کرک شده ورژن 1.1.1 نرم افزار اصلی دوربین است.
    امین خسروشاهی
    [Canon Digital Rebel]
    [EF-S 18-55 f/3.5-5.6] [EF 70-200 f/4L] [EF 50 f/1.4USM] [Canon 17-40 f/4L][Canon EF 28-135 f/3.5-5.6 IS USM]
    [Canon SpeedLite 580EX] [Manfrotto 055PROB tripod+Manfrotto 322RC2 head]

  5. #25
    كاربر همراه
    تاریخ عضویت
    July 2004
    محل سکونت
    Turin -Tehran
    نوشته ها
    102
    تشکر شده
    17
    تشکر کرده
    2

    پیش فرض

    من از همون روز اول هک شدن 300دي فايل اون رو گرفته بودم ولي اين کار رو نکرده بودم -گفتم شايد ايرادهايي داشته باشه که بعدا معلوم بشه و قابل اصلاح نباشه -سه تا سوال دارم -آيا اگر فيرم وور رو نصب کنيم مي تونيم بعدا دوباره نرم افزار قبلي رو نصب کنيم؟- آيا منوهاي داخلي دوربين يا کار کرد کليدها تغيير مي کنه-؟در مورد نصب نرم افزار من در سايت ها برنامه اي رو ديده بودم که از سايت کانون دانلود مي شد و بعد از وصل کردن دوربين به کامپيوتر ول سيستم عامل اصلي رو پاک مي کرد بعد اين سيستم عامل رو از داخل هارد معرفي مي کرديد و اون رو نصب مي کرد-البته يک پيام ارور هم مي داد که نبايد به اون توجه مي کرديم-(برنامه اي که از سايت کانون براي ارتباط دور بين و کامپيوتر دانلو د ميشه براي آپديت نرم افزار اوليه 300دي به در همون ابتداي توليد به ورژن 1.1.1در سايت کانون قار داده شده )مي خواستم بدونم اين روش ريختن سيستم عامل داخا کارت به صورت مستقيم چه تفاوتي با اون سيستم که من خوندم داره؟ --

  6. #26
    كاربر همراه
    تاریخ عضویت
    December 2004
    محل سکونت
    Tehran
    نوشته ها
    345
    تشکر شده
    68
    تشکر کرده
    0

    پیش فرض

    نقل قول نوشته اصلی توسط siavash
    من از همون روز اول هک شدن 300دي فايل اون رو گرفته بودم ولي اين کار رو نکرده بودم -گفتم شايد ايرادهايي داشته باشه که بعدا معلوم بشه و قابل اصلاح نباشه -سه تا سوال دارم -آيا اگر فيرم وور رو نصب کنيم مي تونيم بعدا دوباره نرم افزار قبلي رو نصب کنيم؟- آيا منوهاي داخلي دوربين يا کار کرد کليدها تغيير مي کنه-؟در مورد نصب نرم افزار من در سايت ها برنامه اي رو ديده بودم که از سايت کانون دانلود مي شد و بعد از وصل کردن دوربين به کامپيوتر ول سيستم عامل اصلي رو پاک مي کرد بعد اين سيستم عامل رو از داخل هارد معرفي مي کرديد و اون رو نصب مي کرد-البته يک پيام ارور هم مي داد که نبايد به اون توجه مي کرديم-(برنامه اي که از سايت کانون براي ارتباط دور بين و کامپيوتر دانلو د ميشه براي آپديت نرم افزار اوليه 300دي به در همون ابتداي توليد به ورژن 1.1.1در سايت کانون قار داده شده )مي خواستم بدونم اين روش ريختن سيستم عامل داخا کارت به صورت مستقيم چه تفاوتي با اون سيستم که من خوندم داره؟ --
    سلام..

    راستش من این روش رو امتحان نکردم. ولی با توجه به جزییاتی که از ساختار دوربین حدس میزنم نباید مشکلی داشته باشه. وقتی که شما Firmware رو عوض میکنید در واقع یک image از سیستم عامل دوربین رو تغییر میدین.. ببینید در دنیای دیجیتال تمام وسایل دیجیتالی که با کاربر ارتباط مستقیم دارند، حتما دارای سیستم عامل هستند. (مثل سیستم عامل های ویندوز و لینوکس و ... روی دستگاههای PC) سیستم عامل دوربین (یا همون Firmware ) در واقع ارتباط بین سخت افزار دوربین (مثل کنترلر شاتر، کنترلر دیافراگم، میزان ولتاژ سر سنسور، ...) و شما رو فراهم میکنه که در نتیجه دستورات شما به دوربین درست کار میکنه.. این سیستم عامل بقیه کارهای دوربین رو هم انجام میده (مثل اجرای الگوریتم های پردازش داخلی دوربین و ...) درست مثل ویندوز که شما اونو روی هاردتون نصب میکنید دوربینتون هم یک چیزی داره شبیه هارد دیسک که الکترونیکیه (معمولا بهش میگن Flash) و برای سخت افزار دوربین تعریف شده که تا روشن شد دنبال سیستم عامل روی اون بگرده. کار نصب کردن firmware هم در واقع منتقل کردن اون سیستم عامل دوربین (که به صورت یک فایل هست) به روی این Flash مموری هستش. حالا به هر طریقی که میتونه انجام بشه.. فقط یک احتمال وحود داره که اونم اینه که این سافت ور کانن بی از کپی کردن روی دوربین فایل رو بخونه و
    با این توزیحاتی که من دادم فکر کنم متوجه شدید که شما میتونید به همین روش بقیه Firmwareها رو هم کپی کنید تو دوربینتون.
    منوهای دوربین تغییری نمیکنه فقط چند تا اضافه میشه.
    امین خسروشاهی
    [Canon Digital Rebel]
    [EF-S 18-55 f/3.5-5.6] [EF 70-200 f/4L] [EF 50 f/1.4USM] [Canon 17-40 f/4L][Canon EF 28-135 f/3.5-5.6 IS USM]
    [Canon SpeedLite 580EX] [Manfrotto 055PROB tripod+Manfrotto 322RC2 head]

  7. #27
    كاربر آشنا atana آواتار ها
    تاریخ عضویت
    February 2005
    محل سکونت
    TabriZ
    نوشته ها
    89
    تشکر شده
    194
    تشکر کرده
    15

    پیش فرض 300d

    ba salam . man canon eos 300d daram az etelate shoma binahat mamnonam khaili khoshal shodam az az etelatii ke dadin . inja kasani hastan ke update kardan badesh eshkali pish nayoomade badesham moshkele khasi dar moge update pish nayoomade ya age biyad chi mishe ...
    mamnon misham bishtar tooozih bedin


    http://revolution.cx/rcx/fecset.htm inja ra ham check konid

  8. #28
    كاربر آشنا atana آواتار ها
    تاریخ عضویت
    February 2005
    محل سکونت
    TabriZ
    نوشته ها
    89
    تشکر شده
    194
    تشکر کرده
    15

    پیش فرض 300d

    inja ra ham check kond
    http://www.digit-life.com/articles2/canon300dfw2/ dar morede update 300d ba tasaviresh





    inja ham etelate takhasoosii dare morede 300d
    http://ghonis2.ho8.com/rebelmod9.html
    تصاویر پیوست شده تصاویر پیوست شده

  9. #29
    كاربر آشنا atana آواتار ها
    تاریخ عضویت
    February 2005
    محل سکونت
    TabriZ
    نوشته ها
    89
    تشکر شده
    194
    تشکر کرده
    15

    پیش فرض 300d

    Canon EOS 300D, Alternative Firmware Update
    A little experimental research of how much the functional differences between Canon EOS 10D and EOS 300D depend on their firmware
    Preliminary notes:
    We are grateful to the unselfish authors of this firmware version. We used the "product" created by Ravil and Wasia. Perhaps, there are other ways to use "Easter eggs" from other authors (search in forums, for example here). But Ravil and Vasya are mentioned in English web sites as well, and their mother tongue is dearer to us, so we shall consider their firmware version.

    We are not connected with the authors of this firmware, so any requests and comments should be sent directly to them. We are not responsible for your actions and their consequences. The authors of this firmware are not responsible for that either, this is expressly noted on their web site.

    We are not calling you to update the firmware in your cameras. You will lose your warranty and all that, though we haven't heard about fatal cases (nevertheless, the forums contain enough calls for help and questions, so you should get down to this update only if you have at least minimum "technical" experience). If you made up you mind, carefully read the camera instructions and the official firmware update instructions, as well as the instructions on the web site of the authors of the program. It would be also good to read the instructions to Canon EOS 10D. You shouldn't address the official service centers for the firmware update and after you've done it – for the further improvements and repairs. They are not responsible (it's quite reasonable) for firmware updates (both official and especially "alternative").

    Canon EOS 300D versus EOS 10D
    Canon EOS 300D is good by itself. At least by the fact that this is the first real reflex digital camera at the cost of a good compact digital camera. Its functionality practically didn't suffer from the fight for the price. Interchangeable lenses, depth of field preview, manual and automatic shooting modes, RAW mode, external hot shoe, good image quality at variable ISO (100-800 settings). From its predecessor EOS 10D, the Rebel differs by its "soft" plastic case, controls, and smaller buffer size. But both hardware and software parts are mostly the same as in EOS 10D. This allowed Canon a "quick" launch of an inexpensive camera. This also allows to make almost 10D out of 300D (we should thank Canon for this opportunity, because it "didn't break off the extra pins from the chips").

    Inexperienced photographer, the target audience of this camera, will be happy without any firmware updates. Canon designers picked good "sets" of modes for those who is used only to automatic modes. But in creative modes (priorities and manual settings) "forced" automatic measuring and built-in settings do not always comply with the ideas and habits of a skilled photographer. Of course, all this automatics can be ignored in the manual exposure mode "M" with forced center-weighted exposure metering, and you can focus manually controlling the built-in flash by the aperture.
    But to make the shooting process faster and more comfortable it would be good:
    in order to control the impulse of the built-in flash (exposure compensation),
    set the shooting parameters (file resolution, file parameters) using buttons and dials instead of the menu;
    in creative modes:
    select the exposure metering type "directly" (which is implemented in almost all, even far from professional digital cameras from Canon),
    select the autofocus mode from One-Shot, AI-Servo, and AI-Focus,
    in the aperture-priority mode shoot with a flash using not only long exposures but the standard flash exposure (1/200 sec, for example) as well.
    Other 10D features would be also useful (though there are fewer buttons on the case and it's difficult to implement all 10D features). They include: mirror lock up, first and second curtain sync function, and others.

    You may get around some of the desired functions using image modes (giving up RAW) or you can get used to the inconveniences (select the partial exposure metering mode in creative modes by fixing the exposure - the AE-Lock button). But many functions are already available thanks to an alternative firmware. Out of the listed above functions, the firmware from Wasia does not include the following ones: direct exposure metering control, direct selection between AI-Servo and AI-Focus, first and second curtain sync function. A good and complete description of the features of the latest firmware in PDF format can be found here.

    Updating the Firmware
    The update procedure is simple and standard. The official Canon instructions (it's will be useful to look them through) on updating firmware can be found here. Download the archived file with firmware (for example from the above-mentioned web site). Note that the firmware version for EOS 10D will not do. The latest known firmware version is B7.1 firmware (July, 2004). Extract the firmware. Copy the firmware file E3kr111.fir to a formatted CF card and make sure it occupies 1815 KB. Install the card into the camera Canon EOS 300D (not any other) with a fully charged battery. Turn on the camera and follow the instructions. When the process is completed, turn off and then turn on the camera.

    New Features and their Configuration
    After the firmware update (B7.1 firmware, July 2004) you will get the following additional features to the standard set.
    1. A new item will appear in the camera menu – Custom Functions (C.Fn), as in EOS 10D:


    2. A press on the JUMP button (in earlier firmware versions it was the SET button) in the shooting mode will enable FEC adjustment:


    3. A press on the left button of the arrow pad in the shooting mode changes the focus mode: AF OS - ONE Shot, AF AI - AI focus AF, AF SE - AI servo*,
    or enables indication of the manual focus mode,
    *AF SE - AI servo (in fact it does not work - if follows the object as a servofocus in Sport mode, but it does not allow to take pictures, you can shoot only after you switch the camera to the manual focus mode using the button on the lenses) :


    4. ISO range is extended to 3200.

    Not all 17 options are operational in Custom Functions. The following options are operational:


    the first menu item (from left to right) allows to configure the SET button - 1: file compression quality, 2: file encoding parameters (sharpness, saturation, contrast, color space, color hue), 3: menu display, 4: image replay, 0: no function;

    the second menu item allows to block shutter release without an inserted CF;

    the third menu item allows to select flash sync speed in the aperture-priority mode - 1/200 or Auto (taking no account of flash – long exposures);

    the sixth item allows to select 1/2 or 1/3 exposure level increments;

    the eighth one serves to select the JPEG file size, which is stored in the RAW file;

    the ninth menu item selects the shooting sequence for Auto Exposure Bracketing and White Balance Bracketing;

    the eleventh designates whether the menu returns to the last setting changed or to the first menu option when the Menu button is pressed;

    the twelfth item enables the mirror lockup function;

    the seventeenth menu item configures the mirror lockup delay (1.5, 3, 4.5, 6, 7.5, 10 seconds).


    All other menu items are not operational (in B7.1 firmware).

    Rolling back to the Official Firmware
    I don't know any cases of Canon EOS 300D updates when users asked to get the camera back as it used to be. Nevertheless, we know how to roll back the update. It may be necessary when you need to get the camera to a service center or when a new alternative firmware version cannot be installed over the old alternative one.

    To roll back, you should reset all Custom Functions according to the original Canon EOS 300D firmware. The RESET button from the menu will surely not help you here. Just set all Custom Functions options to: 0,0,0,0,0,1,0,11,0,0,0,0,0,0,0,0,0. Then update the camera with the official program.




    inaa tooozihat ama tasaviresh dar bala has be nooobatii
    bye

  10. #30
    كاربر همراه
    تاریخ عضویت
    July 2004
    محل سکونت
    Turin -Tehran
    نوشته ها
    102
    تشکر شده
    17
    تشکر کرده
    2

    پیش فرض

    من همين 1 ساعت پيش با همون روش ريختن فايل داخل کارت که آقاي امين در اول ين صفحه توضيح داده بودم انجام دادم-با موفقيت انجام شد-البته من با کارت خوان فايل رو داخل کارت ريختم-1نکته هم به نظرم رسيد- فايل جديد رو بايد داخل اولين شاخه يا روت کارت ريخت نه داخل فولدر ها -بعد از اپگريد بايد کارت را فرمت کرد تا دوباره فايل را شناسايي و اقدام به نصب نکند-اين چيزي بود که به نظرم رسيد بگم-خيلي ممنون از دوست عزيز که اين موضوع رو باز کردن چون خيلي وقت بود اين فايل رو دانلود کرده بودم ولي مردد بودم.

صفحه 3 از 11 نخستنخست 1 2 3 4 5 6 7 ... آخرینآخرین

مجوز های ارسال و ویرایش

  • شما نمیتوانید موضوع جدیدی ارسال کنید
  • شما امکان ارسال پاسخ را ندارید
  • شما نمیتوانید فایل پیوست در پست خود ضمیمه کنید
  • شما نمیتوانید پست های خود را ویرایش کنید
  •