سلام
خلاصه بعد از مدتها آپدیت جدیدی برای firmware دوربینمون اومد.
چیز خاصی اضافه نشده بجز ساپورت لنزهای نیکور 800 میلیمتر، بقیه فقط ایراداتی بوده که رفع شدن، چقدر انتظار بهینه تر شدن برکتینگ رو داشتیم یا خیلی کمبودهای دیگه که قبلن تو سایتها و فرومهای مختلف کاربرها نوشته بودن.
به هر حال، روش آپدیت را اگر یادتون رفته تو لینکی که اینجا میگذارم خیلی شفاف توضیح داده.
لینک نیکون:
کد:
http://support.nikonusa.com/app/answers/detail/a_id/18287/~/d7000-firmware-a%3A-1.03-%2F-b%3A1.04
اینم لیست موردهای اصلاح شده
Support for the AF-S NIKKOR 800mm f/5.6E FL ED VR has been added.
Modifications enabled with this upgrade of firmware, release date November 10, 2011
An error where the card may not have been recognized when some memory cards were used has been addressed.
The following issues occurred when the mode dial was rotated from U1 or U2 to another shooting mode or from another shooting mode to U1 or U2 when the power was off or when the exposure meters are off (Auto meter-off). These issues were resolved.
A new folder is sometimes created despite the fact that the current folder does not yet contain 999 files and none of the files are numbered “9999”.
The number of remaining exposures may not be displayed as specified in the settings.
The setting for Role played by card in Slot 2 may change between Overflow, Backup, and RAW Slot 1- JPEG Slot 2.
An issue where Battery info in the setup menu sometimes showed sufficient remaining charge even when the remaining charge for the AA batteries inserted in the MB-D11 battery pack was low has been resolved.
An issue where a saved photo may not have been displayed properly when a movie was displayed in playback mode while saving the photo has been resolved.
An issue where zoom in or zoom out may not have performed properly when the playback zoom in or playback zoom out button was pressed while in Live view has been resolved.
The message displayed when the internal memory of the Wireless Transmitter WT-4 is formatted from the Format transmitter's memory under Device settings in Wireless transmitter of the camera’s setup menu was changed from Done to Built-in memory formatted.
The message displayed when the internal memory of the Wireless Transmitter WT-4 is formatted from the Format transmitter's memory under Device settings in Wireless transmitter of the camera’s setup menu was changed from Done to Built-in memory formatted.