Technical specifications for the mecablitz 52 AF-1 digital
Flash output
High max. guide number 52 for ISO 100/21° and 105 mm
High flash number [e.g. 240 full flashes with NiMH rechargeable batteries (2100 mAh)]
Flash delay 0.1 – 3.5 seconds (depending on energy source and flash output)
Basic configuration
Vertical (+90°) and horizontal (300°) swivel reflector
Illuminated touchscreen display with automatic swivel function (90°)
Motor zoom for 24 – 105 mm illumination
Integrated wide-angle diffuser for 12 mm illumination
Flip-out reflector card
Modelling light (permanent light to check shadow)
Integrated autofocus flash metering
Flash readiness indicator and correct exposure display on unit and on camera
Flash range display on graphic display
Automatic unit shut-off
Metal base with quick lock (not Sony)
Ready for the future
Firmware update via integrated USB socket
Camera-specific system flash modes
E-TTL / E-TTL II flash mode (Canon)
i-TTL / i-TTL-BL flash mode (Nikon)
P-TTL flash mode (Pentax)
Four thirds TTL flash mode (Olympus / Panasonic / Leica)
ADI flash mode (Sony)
Camera-specific TTL remote operation (master/controller/slave mode, depending on camera type)
Servo flash mode
Standard flash modes
TTL flash mode (digital only)
Manual flash mode with 22 partial lighting levels
Servo flash mode with learning functions
HSS – high speed synchronisation
1st and 2nd shutter curtain synchronisation
Manual flash exposure correction for TTL flash mode
Automatic fill-in flash
Power supply
4 x AA alkaline-magnesium or lithium batteries
4 x AA NiMH rechargeable batteries
Included as standard
Operating instructions
Belt pouch
Slave stand