Air 2x Sync Kit
Features
- Receiver and transmitter
- Range up to 300 meter
- Radio camera sync /trigger and flash sync / trigger
- Integrated antenna
- Worldwide use at 2.4 GHz
- Auto power saving
- Up to 1/1500 leaf shutter speed
Technical Data
Specifications – Air Sync:
Frequency band: 2.4 GHz
Separate radio channels: 8
Group/radio channels: N/A
Range: Range Up to 300 m (1000 ft)
Battery type: 4 x AAA
Typical battery lifetime Transmit mode Fast/Normal: 10 hrs/140 hrs
Typical battery lifetime Receive mode: 30 hrs
Sync delay, Fast/Normal mode: 200 μs/465 μs
Antenna type: Integrated
Auto power off: 30 min of inactivity
Synchronization and control:
Sync signal in: ISO 518 hot shoe and 3.5 mm phone plug
Sync signal out: 3.5 mm phone plug
Complete flash control: N/A
Remote flash energy control: N/A
Remote modeling light control: N/A
Automatic interaction with generator: N/A
Master mode: N/A
Sync/Trigger: Yes
Measurements:
Dimensions: 70x50x40 mm
Weight: 40g / 70g without battery
Remote control and sync without cables
Now it’s easy to shape and control your light from as far away as 300 m (1000 ft). Our new digital radio system, Profoto Air Remote, is built in to all Pro-8a Air generators.
Complete flash control of your camera, in your hand or from your computer, including flash power and modeling light control. Control an unlimited number of generators and heads on eight channels.
Profoto Air devices deliver sync signals with a very short delay, just 200μs in fast mode. Signal connections are made with either a hot shoe or a cable.
These small, handheld devices weigh only 70 g (2.5 oz) including batteries. They pack a lot of functionality and reliability into an easy-to-use control panel. Operating at
2.4 GHz, they are approved for world wide use.
Profoto Air systems with sync can also operate with external receivers on older generators or other brands.
Profoto Air Sync:
Syncs flash generators or cameras, in groups or individually with the same high performance as Profoto Air Remote. The Profoto Air Sync provides a simple solution when you do not need to control the power of your flash and only need to trigger it, with your camera. Profoto Air Sync can also be used as a receiver and sync generators without built in Profoto Air.